Digital library
Textbooks, references and open learning resources.
External
Aerodynamics and Aircraft Performance
James Marchman III · Virginia Tech Libraries · 2004
Aerodynamics and Aircraft Performance, 3rd edition is a college undergraduate-level introduction to aircraft aerodynamics and performance. This text is designed for a course in Aircraft Performance that is taught before the students have had any course in fluid mechanics, fluid dynamics, or aerodynamics. The text is meant to provide the essential information from these types of courses that is needed for teaching basic subsonic aircraft performance, and it is assumed that the students will learn the full story of aerodynamics in other, later courses. The text assumes that the students will have had a university level Physics sequence in which they will have been introduced to the most fundamental concepts of statics, dynamics, fluid mechanics, and basic conservation laws that are needed to understand the coverage that follows. It is also assumed that students will have completed first year university level calculus sequence plus a course in multi-variable calculus. Separate courses in engineering statics and dynamics are helpful but not necessary. Any student who takes a course using this text after completing courses in aerodynamics or fluid dynamics should find the chapters of this book covering those subjects an interesting review of the material. The 236-page text was created specifically for use by undergraduate students in Aerospace Engineering and was based on Professor Marchman’s many years of experience teaching related subject matter as well as his numerous wind tunnel research projects related to aircraft aerodynamics and his personal experience as the owner and pilot of a general aviation airplane. It has been used at Virginia Tech and other universities. Instructors reviewing, adopting, or adapting parts or the whole of the text are requested to register their interest at: https://bit.ly/aerodynamics_interest.
External
Stability of Ships and Other Bodies
Genick Bar-Meir · Potto Project · 2021
This book, Stability of Ships and Other Bodies, describes the fundamentals when and why floating bodies are stable. In addition, it describes steps that transforms un–stable bodies to stable. This book is designed to replace all the other books and inseminate that recent developed technology and advances. The material in standard books is so entrenched, old, and outdated material that one can be only amazed. For example, concept like potential stability is not discussed or even mentioned in any of all the books that this author review. This book written from physical point of view rather then construction point of view like all the books review by this author on stability. It is hoped that the book could be used as a reference book for people who have at least some basics knowledge of science areas such as algebra, basic physics, etc. Even without deep understating the graphs in this book can be used to find necessarily quantities needed to understand if to fix your vessel.
External
Basic Blueprint Reading
Ric Costin · Open Oregon Educational Resources · 2019
This is an entry level blueprint reading book written for the first year welding student. The book will be used in the first term of a two year welding program to familiarize the student to sketching and reading blueprints.
External
Interpretation of Metal Fab Drawings
Cameren Moran · Open Oregon Educational Resources · 2021
Interpreting metal fab drawings is a course that introduces the principles of interpretation and application of industrial fabrication drawings. Basic principles and techniques of metal fabrication are introduced by planning and construction of fixtures used in fabrication from drawings. Basic tools and equipment for layout fitting of welded fabrications are utilized. Covers the use and application of the AWS welding symbols. This course will utilize blueprints and welding symbols and will apply them in classroom and in shop as practical assignments.
External
Traffic Flow Theory: An introduction with exercises
Victor Knoop · TU Delft Open · 2018
Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.
External
Bio-Inspired Sensory Systems
Geoffrey Brooks · Florida State University · 2021
Using natural sensory system concepts to develop and improve sensory systems will continue to thrive for many years to come. Technology advances rapidly (Moore’s Law) as does our understanding of biological principles and designs. These trends fuel the fertile grounds of bio-inspired sensory systems, a topic that is inherently multidisciplinary. This book will serve well as either an academic text on the subject or an introduction to the variety of proven bio-inspired designs. The focus is on sensory systems that interpret environmental stimuli. It introduces natural photo-, mechano-, and chemo-sensory systems across the animal kingdom and also summarizes various novel engineering ideas that glean ideas from these natural sensory systems.
External
Applied Fluid Mechanics Lab Manual
Habib Ahmari; Shah Md Imran Kabir; Ginny Bowers · Mavs Open Press · 2019
This lab manual provides students with the theory, practical applications, objectives, and laboratory procedure of ten experiments. The manual also includes educational videos showing how student should run each experiment and a workbook for organizing data collected in the lab and preparing result tables and charts.
External
Building Maintenance & Construction: Tools and Maintenance Tasks
Clifford Rutherford · University of Hawaii Manoa · 2018
Building Maintenance & Construction: Tools and Maintenance Tasks introduces and develops knowledge of basic building maintenance tools and materials, applied skills and techniques, industry health and safety standards, and preventive maintenance and troubleshooting practices required by employers for entry-level positions in the building trades and facilities maintenance fields.
External
Electromagnetics
Steven Ellingson · Virginia Tech Publishing · 2020
Electromagnetics, volume 2 by Steven W. Ellingson is a 216-page peer-reviewed open textbook designed especially for electrical engineering students in the third year of a bachelor of science degree program. It is intended as the primary textbook for the second semester of a two-semester undergraduate engineering electromagnetics sequence. The book addresses magnetic force and the Biot-Savart law; general and lossy media; parallel plate and rectangular waveguides; parallel wire, microstrip, and coaxial transmission lines; AC current flow and skin depth; reflection and transmission at planar boundaries; fields in parallel plate, parallel wire, and microstrip transmission lines; optical fiber; and radiation and antennas. To express your interest in this book or series, please visit http://bit.ly/vtpublishing-updates Additional resources Problem sets and the corresponding solution manuals; Slides of figures used in and created for the book; LaTeX sourcefiles; Errata for Volume 2; Collaborator portal for the Electromagnetics series; Faculty listserv for the Electromagnetics series. An accessible version will be available in January 2020. The Open Electromagnetics Project Led by Steven W. Ellingson at Virginia Tech, the goal of the Open Electromagnetics Project is to create no-cost openly-licensed content for courses in engineering electromagnetics. The project is motivated by two things: lowering learning material costs for students and giving faculty the freedom to adopt, modify, and improve their educational resources. Books in this Series Electromagnetics, Volume 1 https://doi.org/10.21061/electromagnetics-vol-1 Electromagnetics, Volume 2 https://doi.org/10.21061/electromagnetics-vol-2
External
Microwave and RF Design: Amplifiers and Oscillators
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Modules
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Networks
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Transmission Lines
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Transmission Lines builds on the concepts of forward- and backward-traveling waves. Many examples are included of advanced techniques for analyzing and designing transmission line networks with microstrip lines primarily used in design examples. Coupled-lines are an important functional element in microwave circuits, and circuit equivalents of coupled lines are introduced as fundamental building blocks in design. The text and examples introduce the often hidden design requirements of mitigating parasitic effects and eliminating unwanted modes of operation. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Radio Systems
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Fundamentals of Microwave and RF Design
Michael Steer · North Carolina State University Libraries · 2019
Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming.
External
Introduction to Aerospace Structures and Materials
René Alderliesten · TU Delft Open · 2018
This book provides an introduction to the discipline of aerospace structures and materials. It is the first book to date that includes all relevant aspects of this discipline within a single monologue. These aspects range from materials, manufacturing and processing techniques, to structures, design principles and structural performance, including aspects like durability and safety. With the purpose of introducing students into the basics of the entire discipline, the book presents the subjects broadly and loosely connected, adopting either a formal description or an informal walk around type of presentation. A key lessons conveyed within this book is the interplay between the exact science and engineering topics, like solid material physics and structural analysis, and the soft topics that are not easily captured by equations and formulas. Safety, manufacturability, availability and costing are some of these topics that are presented in this book to explain decisions and design solutions within this discipline.
External
Chemical Process Dynamics and Controls
Peter Woolf · openmichigan · 2009
Process controls is a mixture between the statistics and engineering discipline that deals with the mechanism, architectures, and algorithms for controlling a process. Some examples of controlled processes are: •Controlling the temperature of a water stream by controlling the amount of steam added to the shell of a heat exchanger. •Operating a jacketed reactor isothermally by controlling the mixture of cold water and steam that flows through the jacket of a jacketed reactor. •Maintaining a set ratio of reactants to be added to a reactor by controlling their flow rates. •Controlling the height of fluid in a tank to ensure that it does not overflow.
External
Direct Energy
Andrea Mitofsky · Andrea M. Mitofsky · 2018
Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.
External
Operational Amplifiers & Linear Integrated Circuits: Theory and Application
James Fiore · dissidents · 2018
The goal of this text, as its name implies, is to allow the reader to become proficient in the analysis and design of circuits utilizing modern linear ICs. It progresses from the fundamental circuit building blocks through to analog/digital conversion systems. The text is intended for use in a second year Operational Amplifiers course at the Associate level, or for a junior level course at the Baccalaureate level. In order to make effective use of this text, students should have already taken a course in basic discrete transistor circuits, and have a solid background in algebra and trigonometry, along with exposure to phasors. Calculus is used in certain sections of the text, but for the most part, its use is kept to a minimum. For students without a calculus background, these sections may be skipped without a loss of continuity. (The sole exception to this being Chapter Ten, Integrators and Differentiators, which hinges upon knowledge of calculus.) There is also a lab manual for this textbook.
External
Semiconductor Devices: Theory and Application
James Fiore · dissidents · 2018
The goal of this text, as its name implies, is to allow the reader to become proficient in the analysis and design of circuits utilizing discrete semiconductor devices. It progresses from basic diodes through bipolar and field effect transistors. The text is intended for use in a first or second year course on semiconductors at the Associate or Baccalaureate level. In order to make effective use of this text, students should have already taken coursework in basic DC and AC circuits, and have a solid background in algebra and trigonometry along with exposure to phasors. Calculus is used in certain sections of the text but for the most part it is used for equation derivations and proofs, and is kept to a minimum. For students without a calculus background these sections may be skipped without a loss of continuity. There is also a lab manual for this textbook.