Digital library
Textbooks, references and open learning resources.
External
Aviation Maintenance Technician Handbook – Airframe (FAA-H-8083-31B)
U.S. Department of Transportation Federal Aviation Administration · Federal Aviation Administration · 2023
The Aviation Maintenance Technician Handbook—Airframe (FAA-H-8083-31B) is one of a series of three handbooks for persons preparing for certification as an airframe or powerplant mechanic. This handbook provides basic information on principles, fundamentals, and technical procedures in the subject matter areas relating to the airframe rating. It is designed to aid students enrolled in a formal course of instruction, as well as the individual who is studying on their own. Since the knowledge requirements for the airframe and powerplant ratings closely parallel each other in some subject areas, the chapters which discuss fire protection systems and electrical systems contain some material which is also duplicated in the Aviation Maintenance Technician Handbook—Powerplant (FAA-H-8083-32B). This handbook contains information on airframe construction features, assembly and rigging, fabric covering, structural repairs, and aircraft welding. The handbook also contains an explanation of the units that make up the various airframe systems. Because there are so many different types of aircraft in use today, it is reasonable to expect that differences exist in airframe components and systems. To avoid undue repetition, the practice of using representative systems and units is carried out throughout the handbook. Subject matter treatment is from a generalized point of view and should be supplemented by reference to manufacturers’ manuals or other textbooks if more detail is desired. This handbook is not intended to replace, substitute for, or supersede official regulations or manufacturers’ instructions. Occasionally the word “must” or similar language is used where the desired action is deemed critical. The use of such language is not intended to add to, interpret, or relieve a duty imposed by Title 14 of the Code of Federal Regulations (14 CFR).
External
Aviation Maintenance Technician Handbook – Powerplant (FAA-H-8083-32B)
U.S. Department of Transportation Federal Aviation Administration · Federal Aviation Administration · 2023
The Aviation Maintenance Technician Handbook–Powerplant (FAA-H-8083-32B) is one of a series of three handbooks for persons preparing for certification as a powerplant mechanic. It is intended that this handbook provide the basic information on principles, fundamentals, and technical procedures in the subject matter areas relating to the powerplant rating. It is designed to aid students enrolled in a formal course of instruction, as well as the individual who is studying on his or her own. Since the knowledge requirements for the airframe and powerplant ratings closely parallel each other in some subject areas, the chapters which discuss fire protection systems and electrical systems contain some material which is also duplicated in the Aviation Maintenance Technician Handbook–Airframe (FAA-H-8083-31B). This handbook contains an explanation of the units that make up each of the systems that bring fuel, air, and ignition together in an aircraft engine for combustion. It also contains information on engine construction features, lubrication systems, exhaust systems, cooling systems, cylinder removal and replacement, compression checks, and valve adjustments. Because there are so many different types of aircraft in use today, it is reasonable to expect that differences exist in airframe components and systems. To avoid undue repetition, the practice of using representative systems and units is carried out throughout the handbook. Subject matter treatment is from a generalized point of view and should be supplemented by reference to manufacturer's manuals or other textbooks if more detail is desired. This handbook is not intended to replace, substitute for, or supersede official regulations or the manufacturer’s instructions. Occasionally the word “must” or similar language is used where the desired action is deemed critical. The use of such language is not intended to add to, interpret, or relieve a duty imposed by Title 14 of the Code of Federal Regulations (14 CFR).
External
Aviation Maintenance Technician Handbook – General (FAA-H-8083-30B)
U.S. Department of Transportation Federal Aviation Administration · Federal Aviation Administration · 2023
The Aviation Maintenance Technician Handbook–General (FAA-H-8083-30B) was developed as one of a series of three handbooks for persons preparing for mechanic certification with airframe or powerplant ratings, or both. It is intended that this handbook will provide basic information on principles, fundamentals, and technical procedures in the subject matter areas common to both the airframe and powerplant ratings. Emphasis in this volume is on theory and methods of application. The handbook is designed to aid students enrolled in a formal course of instruction preparing for FAA certification as a maintenance technician as well as for current technicians who wish to improve their knowledge. This volume contains information on mathematics, aircraft drawings, weight and balance, aircraft materials, processes and tools, physics, electricity, inspection, ground operations, and FAA regulations governing the certification and work of maintenance technicians. New to this volume is a section addressing how successful aviation maintenance technicians incorporate knowledge and awareness of ethics, professionalism and human factors in the field
External
Introduction to Systems Biology: Workbook for Flipped-Classroom Teaching
Thomas Sauter; Marco Albrecht · Open Book Publishers · 2023
This book is an introduction to the language of systems biology, which is spoken among many disciplines, from biology to engineering. Authors Thomas Sauter and Marco Albrecht draw on a multidisciplinary background and evidence-based learning to facilitate the understanding of biochemical networks, metabolic modeling and system dynamics. Their pedagogic approach briefly highlights core ideas of concepts in a broader interdisciplinary framework to guide a more effective deep dive thereafter. The learning journey starts with the purity of mathematical concepts, reveals its power to connect biological entities in structure and time, and finally introduces physics concepts to tightly align abstraction with reality. This workbook is all about self-paced learning, supports the flipped-classroom concept, and kick-starts with scientific evidence on studying. Each chapter comes with links to external YouTube videos, learning checklists, and Integrated real-world examples to gain confidence in thinking across scientific perspectives. The result is an integrated approach that opens a line of communication between theory and application, enabling readers to actively learn as they read. This overview of capturing and analyzing the behavior of biological systems will interest adherers of systems biology and network analysis, as well as related fields such as bioinformatics, biology, cybernetics, and data science.
External
Fundamentos de sistemas operativos
Gunnar Wolf; Esteban Ruiz; Federico Bergero; Erwin Meza · Universidad Nacional Autónoma de México · 2015
Todos los usuarios de equipos de cómputo (esto es, prácticamente cualquier persona del mundo) tienen contacto con un sistema operativo, y ciertas expectativas acerca de su funcionamiento. ¿Cómo es que un sistema operativo puede gestionar y compartir los recursos de cómputo? Hoy en día, a pesar de que menos de una decena es conocida por la población en general, hay cientos de sistemas operativos en uso y bajo un desarrollo activo. Cada uno de ellos persigue distintos fines, sea por la arquitectura o la capacidad de los equipos en que se ejecutará, características específicas que implementa, o persigue atraer un segmento distinto de la población. Todos ellos, sin embargo, realizan las mismas operaciones básicas, parten de los mismos fundamentos. Este libro, diseñado para servir como bibliografía para un curso de Sistemas Operativos para licenciatura, presenta las principales áreas en que se divide el trabajo de un sistema operativo. El libro está escrito nativamente en español, salvando las inconveniencias en que muchas veces incurren las traducciones técnicas. Los autores (uno mexicano, dos argentinos y uno colombiano) procuraron que el lenguaje y los términos empleados resulten lo más neutros y universales a la región latinoamericana.
External
Analysis and Design of Elementary MOS Amplifier Stages
Boris Murmann · Boris Murmann · 2013
Analyzes core linear analog circuit designs: common-source, common-gate, and common-drain stages Design-oriented approach; analyzes various circuits through examples and exercises Part of the Modular Series of Microelectronic Device and Circuit Design Each module in the series provides a brief fundamental look at a specific topic "As of November 1, 2022, National Technology and Science Press ("NTS") has discontinued publication of 'Analysis and Design of Elementary MOS Amplifier Stages.' Accordingly, NTS has returned all copyrights and attendant rights with respect to the work to Boris Murmann."
External
Engineering Mechanics: Statics
Elisabeth (Libby) Osgood; Gayla Cameron; Emma Christensen · Robertson Library Pressbooks
Introduction to engineering mechanics: statics, for those who love to learn. Concepts include: particles and rigid body equilibrium equations, distributed loads, shear and moment diagrams, trusses, method of joints and sections, & inertia.
External
Biomedical Engineering for Africa
Tania Douglas · University of Cape Town Libraries · 2019
Health technology innovation in low- and middle-income countries (LMICs), including countries in Africa, falls far short of meeting the healthcare needs of these settings. The result is a heavy reliance on products and technologies imported from industrialised countries that are often not suited to, or sustainable for, LMICs. Appropriate healthcare products for LMICs are best developed in these countries, where local knowledge and understanding of needs, context and available resources may be incorporated into designs and implementation plans. The objectives for enabling health technology development in LMICs include: 1) expanding the base of expertise through research training programmes with a problem-solving focus; 2) stimulating new knowledge, approaches and solutions by enabling innovation; and 3) integrating research communities within and across institutions to build critical mass. The field of biomedical engineering is central to health technology innovation. This book is a response to the need for biomedical engineering capacity in Africa. It is grounded in the African context. It serves as a resource for academics and students in biomedical engineering, for those interested in entering the field in any capacity and for practitioners at every stage of product development. University leaders intent on establishing new biomedical engineering programmes or departments, may draw on the content for guidance on structuring their offerings. The book reaches beyond Africa, as it is relevant to other LMIC settings, and provides insights to guide global health initiatives focused on technology innovation.
External
Construction Contracting: Business and Legal Principles, Second Edition
Stewart Bartholomew · Virginia Tech Libraries · 2002
This introduction to construction contracting as it applies to typical, every-day situations explains “theoretical” ideas in terms of what really happens in practice. It emphasizes the more common case law holdings and industry customs that help avoid troublesome legal issues during the completion of a project. Instructors reviewing or adopting this book are encouraged to register at https://bit.ly/interest_construction_contracting Any derivatives of this work must comply with the use and attribution requirements of the Creative Commons license, and include the following statement, “This material was previously published by Pearson Education, Inc.” Construction Contracting, 2nd edition is an "out of print," rights-reverted book for which the author's estate has given permission for digitization and release under a CC BY NC SA 4.0 license. It was previously published in 2002 by Pearson ISBN 1-13-091055-4. The copyright page has been edited and graphics redrawn. A new cover, dedication, acknowledgements, how to adopt this book, and author biography have been added, and the table of contents has been revised. As the book has been reformatted, the original back of the book index is not included.
External
Open Signals and Systems Laboratory Exercises
Aaron Fonseca; Julie Dickerson · Iowa State University · 2024
Open Signals and Systems Laboratory Exercises is a collection of lab assignments that have been used in EE 224: Signals and Systems I in the Department of Electrical and Computer Engineering at Iowa State University. These lab exercises have been curated, edited, and presented in a consistent format to improve student learning. This second edition provides a thorough coverage of the MATLAB concepts needed to complete each exercise, and incorporates hardware descriptions and explanations into the exercises that had integrated new lab equipment. A ZIP file containing additional materials is also available.
External
Ports and Waterways: Navigating the changing world
Mark van Koningsveld; Henk Verheij; Poonam Taneja; Huib de Vriend · TU Delft Open
Before you lies the book ‘Ports and Waterways - Navigating the changing world’, written by the Ports and Waterways team, part of the Civil Engineering and Geosciences faculty at Delft University of Technology. It integrates the content of a number of separate lecture notes we used in our teaching activities and updates this information where relevant. The integration reflects our vision that ports and waterways should be viewed as parts of a coherent system that supports waterborne supply chains, and that their integral design and operation is essential.
External
Aerodynamics and Aircraft Performance
James Marchman III · Virginia Tech Libraries · 2004
Aerodynamics and Aircraft Performance, 3rd edition is a college undergraduate-level introduction to aircraft aerodynamics and performance. This text is designed for a course in Aircraft Performance that is taught before the students have had any course in fluid mechanics, fluid dynamics, or aerodynamics. The text is meant to provide the essential information from these types of courses that is needed for teaching basic subsonic aircraft performance, and it is assumed that the students will learn the full story of aerodynamics in other, later courses. The text assumes that the students will have had a university level Physics sequence in which they will have been introduced to the most fundamental concepts of statics, dynamics, fluid mechanics, and basic conservation laws that are needed to understand the coverage that follows. It is also assumed that students will have completed first year university level calculus sequence plus a course in multi-variable calculus. Separate courses in engineering statics and dynamics are helpful but not necessary. Any student who takes a course using this text after completing courses in aerodynamics or fluid dynamics should find the chapters of this book covering those subjects an interesting review of the material. The 236-page text was created specifically for use by undergraduate students in Aerospace Engineering and was based on Professor Marchman’s many years of experience teaching related subject matter as well as his numerous wind tunnel research projects related to aircraft aerodynamics and his personal experience as the owner and pilot of a general aviation airplane. It has been used at Virginia Tech and other universities. Instructors reviewing, adopting, or adapting parts or the whole of the text are requested to register their interest at: https://bit.ly/aerodynamics_interest.
External
Introduction to Biosystems Engineering
Nicholas M. Holden; Mary Leigh Wolfe; Jactone A. Ogejo; Enda J. Cummins · American Society of Agricultural and Biological Engineers (ASABE), Virginia Tech Publishing · 2021
The discipline of Biosystems Engineering emerged in the 1990s from the traditional strongholds of agricultural engineering and food engineering. Biosystems engineering integrates engineering science and design with applied biological, environmental, and agricultural sciences. Introduction to Biosystems Engineering is targeted at 1st and 2nd year university-level students with an interest in biosystems engineering but who are not yet familiar with the breadth and depth of the subject. It is designed as a coherent educational resource, also available for download as individual digital chapters. The book can be used as a localized, customizable text for introductory courses in Biosystems Engineering globally. It is written as a series of stand-alone chapters organized under six major topics: Food and Bioprocessing; Environment; Buildings and Infrastructure; Information and Communications Technology and Data; Machinery Systems; and Energy. Each chapter is organized around stated learning outcomes and describes key concepts, applications of the concepts, and worked examples. Instructors adopting or reviewing this text are encouraged to register with the publisher using this form.
External
Applied Fluid Mechanics Lab Manual
Habib Ahmari; Shah Md Imran Kabir; Ginny Bowers · Mavs Open Press · 2019
This lab manual provides students with the theory, practical applications, objectives, and laboratory procedure of ten experiments. The manual also includes educational videos showing how student should run each experiment and a workbook for organizing data collected in the lab and preparing result tables and charts.
External
Electromagnetics
Steven Ellingson · Virginia Tech Publishing · 2020
Electromagnetics, volume 2 by Steven W. Ellingson is a 216-page peer-reviewed open textbook designed especially for electrical engineering students in the third year of a bachelor of science degree program. It is intended as the primary textbook for the second semester of a two-semester undergraduate engineering electromagnetics sequence. The book addresses magnetic force and the Biot-Savart law; general and lossy media; parallel plate and rectangular waveguides; parallel wire, microstrip, and coaxial transmission lines; AC current flow and skin depth; reflection and transmission at planar boundaries; fields in parallel plate, parallel wire, and microstrip transmission lines; optical fiber; and radiation and antennas. To express your interest in this book or series, please visit http://bit.ly/vtpublishing-updates Additional resources Problem sets and the corresponding solution manuals; Slides of figures used in and created for the book; LaTeX sourcefiles; Errata for Volume 2; Collaborator portal for the Electromagnetics series; Faculty listserv for the Electromagnetics series. An accessible version will be available in January 2020. The Open Electromagnetics Project Led by Steven W. Ellingson at Virginia Tech, the goal of the Open Electromagnetics Project is to create no-cost openly-licensed content for courses in engineering electromagnetics. The project is motivated by two things: lowering learning material costs for students and giving faculty the freedom to adopt, modify, and improve their educational resources. Books in this Series Electromagnetics, Volume 1 https://doi.org/10.21061/electromagnetics-vol-1 Electromagnetics, Volume 2 https://doi.org/10.21061/electromagnetics-vol-2
External
Microwave and RF Design: Amplifiers and Oscillators
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Networks
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Fundamentals of Microwave and RF Design
Michael Steer · North Carolina State University Libraries · 2019
Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming.
External
Dredging Engineering: Special Topics
Sape Miedema · TU Delft Open · 2019
In dredging, production estimating is carried out mainly with analytical physical models of the different dredging processes.Slurry transport of settling slurries and cutting processes in sand, clay and rock are already covered in two other books by the author.Other processes like hopper sedimentation and erosion, water jet fluidization, cutter head spillage, pump/pipeline dynamics and clamshell dredging are covered in this Special Topics Edition.New topics may be added in the near future
External
Direct Energy
Andrea Mitofsky · Andrea M. Mitofsky · 2018
Direct Energy Conversion discusses both the physics behind energy conversion processes and a wide variety of energy conversion devices. A direct energy conversion process converts one form of energy to another through a single process. The first half of this book surveys multiple devices that convert to or from electricity including piezoelectric devices, antennas, solar cells, light emitting diodes, lasers, thermoelectric devices, and batteries. In these chapters, physical effects are discussed, terminology used by engineers in the discipline is introduced, and insights into material selection is studied. The second part of this book puts concepts of energy conversion in a more abstract framework. These chapters introduce the idea of calculus of variations and illuminate relationships between energy conversion processes.