Digital library
Textbooks, references and open learning resources.
External
Structural Analysis
Felix Udeyo · Temple University
This text is intended to teach students the methods and techniques for the analysis of structures. A sound knowledge of structures is a prerequisite for their proper design and ensures the structural integrity of civil engineering infrastructural systems. This textbook is designed for upper-level undergraduates studying civil engineering, construction engineering and management, and architecture. It is also useful for construction professionals seeking licensure in their field of practice.
External
All Things Flow - Fluid Mechanics for the Natural Sciences
Bill Smyth · Oregon State University
This book on fluid mechanics is concerned with phenomena that we have all been familiar with since childhood: flows you see in sinks and bathtubs, in rivers, and at the beach. Prerequisites include basic linear algebra, differential and integral calculus and Newton’s laws of motion. As we go along we discover the need for the more advanced tools of tensor analysis.
External
Slurry Transport
Sape A. Miedema · Delft University of Technology
In dredging, trenching, (deep sea) mining, drilling, tunnel boring and many other applications, sand, clay or rock has to be excavated. The book covers horizontal transport of settling slurries (Newtonian slurries). Non-settling (non-Newtonian) slurries are not covered.
External
Structural Mechanics
Tomasz Wierzbicki · Massachusetts Institute of Technology
This text covers the fundamental concepts of structural mechanics with applications to marine, civil, and mechanical structures. Topics include analysis of small deflections of beams, moderately large deflections of beams, columns, cables, and shafts; elastic and plastic buckling of columns, thin walled sections and plates; exact and approximate methods; energy methods; principle of virtual work; introduction to failure analysis of structures.
External
Fundamentals of Foundation Engineering and their Applications 2e
George Kouretzis · The University of Newcastle, Australia
In the contents: 02: SOIL AND GROUNDWATER CONTAMINATION AND REMEDIATION TECHNIQUES AN INTRODUCTION TO GEOENVIRONMETAL ENGINEERING
External
Introduction to Design Equity
Miller · LibreTexts
Why do affluent, liberal, and design-rich cities like Minneapolis have some of the biggest racial disparities in the country? How can designers help to create more equitable communities? Introduction to Design Equity, an open access book for students and professionals, maps design processes and products against equity research to highlight the pitfalls and potentials of design as a tool for building social justice.
External
Building Information - Representation and Management
Alexander Koutamanis · Delft University of Technology
The book presents a coherent theory of building information, focusing on its representation and management in the digital era. It addresses issues such as the information explosion and the structure of analog building representations to propose a parsimonious approach to the deployment and utilization of symbolic digital technologies like BIM.
External
Intermediate Fluid Mechanics
James Liburdy · Oregon State University
This book is meant to be a second course in fluid mechanics that stresses applications dealing with external potential flows and intermediate viscous flows. Students are expected to have some background in some of the fundamental concepts of the definition of a fluid, hydrostatics, use of control volume conservation principles, initial exposure to the Navier-Stokes equations, and some elements of flow kinematics, such as streamlines and vorticity.
External
Fundamentals of Transportation
David Levinson et al. · Wikibook
This text is aimed at undergraduate civil engineering students, though the material may provide a useful review for practitioners and graduate students in transportation. Often this is the first engineering course students take, which requires a switch in thinking from simply solving given problems to formulating the problem mathematically before solving it, i.e. from straight-forward calculation often found in undergraduate Calculus to vaguer word problems more reflective of the real world.
External
Surveying and Mapping
Christian Tiberius; Hans van der Marel; René Reudink; Freek van Leijen · TU Delft Open · 2021
This book provides an introduction, at academic level, into the field of surveying and mapping. The book has been compiled based on hand-outs and readers written for the third-year course Surveying and Mapping, in the bachelor program Civil Engineering at Delft University of Technology. This book covers a wide range of measurement techniques, from land surveying, GPS/GNSS and remote sensing to the associated data processing, the underlying coordinate reference systems, as well as the analysis and visualization of the acquired geospatial information.
External
All Things Flow: Fluid Mechanics for the Natural Sciences
William Smyth · Oregon State University · 2019
This book began as lecture notes for an Oregon State University course in fluid mechanics, designed for beginning graduate students in physical oceanography. Because of its fundamental nature, this course is often taken by students outside physical oceanography, e.g., atmospheric science, civil engineering, physics and mathematics. In later courses, the student will discover esoteric fluid phenomena such as internal waves that propagate through the sky, water phase changes that govern clouds, and planetary rotation effects that control large-scale winds and ocean currents. In contrast, this course concerns phenomena that we have all been familiar with since childhood: flows you see in sinks and bathtubs, in rivers, and at the beach. In this context, we develop the mathematical techniques and scientific reasoning skills needed for higher-level courses and professional research.
External
Digital approaches to building measurement: Standards, tools and techniques
Argaw Gurmu; Nilupa Udawatta; Gayani Karunasena; Reza Taban · Deakin University · 2025
To align the teaching and learning of building measurement with current industry practices and standards in Australia, it is essential to update traditional teaching materials. Existing textbooks predominantly focus on manual measurement methods and provide limited coverage of computer-based techniques that are now widely adopted in professional practice. This handbook addresses this gap by integrating digital measurement tools, particularly RIB CostX software, which reflects contemporary industry workflows. The approach adopted in this book aligns with the principles of the Australian and New Zealand Standard Methods of Measurement (ANZSMM) and supports alignment with industry expectations. This handbook covers key trades, namely groundworks, concrete, formwork, reinforcement, and masonry, which are covered in building measurement and estimating units such as SRE272-Building Measurement, SRE302- Building Measurement and Estimating, and SRQ774-Construction Measurement and Estimating.
External
The Design of the Built Environment: The University of Illinois Urbana-Champaign Campus and Its Context
Kevin Hinders · Illinois Open Publishing Network · 2026
Kevin J. Hinders’s The Design of the Built Environment offers an exploration of the architectural, cultural, and historical development of the University of Illinois Urbana-Champaign campus and its surrounding context. Structured around thematic walking tours, the manuscript examines architectural principles and then uses the campus and its surroundings to illustrate the concepts. It delves into the evolution of public spaces, technical design considerations, and the influence of local, regional, and national planning. Through case studies, historical analysis, and design theory, Hinders illustrates how built environments reflect collective values, cultural shifts, and functional needs. The work emphasizes experiential learning and encourages readers to engage with the built world through observation, reflection, and spatial understanding.
External
Network quality control
Peter Teunissen · TU Delft Open · 2024
The aim of computing a geodetic network is to determine the geometry of the configuration of a set of points from spatial observations (e.g. GPS baselines and/or terrestrial measurements). The configuration of points usually consists of newly established points, of which the coordinates still need to be determined, and already existing points, the so-called control points, of which the coordinates are known. Network quality control deals with the qualitative aspects of network design, network adjustment, network validation and network connection. By means of a network adjustment the relative geometry of the new points is determined and integrated into the geometry of the existing control points. Prior to the network adjustment, the geometry of the network is designed on the basis of precision and reliability criteria. The adjustment and validation of the overall geometry can be divided in two phases, the free network phase and the connected network phase. In the free network phase, the known coordinates of the control points do not take part in the adjustment and validation. The possible use of a free network phase is based on the idea that a good geodetic network should be sufficiently precise and reliable in itself, without the need of external control. Moreover, it allows one to validate the quality of the external control. In the connected network phase, the geometry of the free network is integrated into the geometry of the control points. Adjustment and validation in this second phase differs from the free network phase. The adjustment in the second phase is a constrained connection adjustment, since it is often not practical to see the coordinates of the control points change every time a free network is connected to them. For the validation of the connected network however, the unconstrained connected adjustment is used as input. This allows one to take the intrinsic uncertainty of the coordinates of the control points in the connection phase into account. T
External
Dynamic data processing: Recursive least-squares
Peter Teunissen · TU Delft Open · 2024
This book is a follow-up on Adjustment theory. It extends the theory to the case of time-varying parameters with an emphasis on their recursive determination. Least-squares estimation will be the leading principle used. A least-squares solution is said to be recursive when the method of computation enables sequential, rather than batch, processing of the measurement data. The recursive equations enable the updating of parameter estimates for new observations without the need to store all past observations. Methods of recursive least-squares estimation are therefore particularly useful for applications in which the time-varying parameters need to be instantly determined. Important examples of such applications can be found in the fields of real-time kinematic positioning, navigation and guidance, or multivariate time series analysis. The goal of this book is therefore to convey the necessary knowledge to be able to process sequentially collected measurements for the purpose of estimating time-varying parameters. When determining time-varying parameters from sequentially collected measurement data, one can discriminate between three types of estimation problems: filtering, prediction and smoothing. Filtering aims at the determination of current parameter values, while smoothing and prediction aim at the determination of respectively past and future parameter values. The emphasis in this book will be on recursive least-squares filtering. The theory is worked out for the important case of linear(ized) models. The measurement-update and time-update equations of recursive least-squares are discussed in detail. Models with sequentially collected data, but time-invariant parameters are treated first. In this case only the measurement-update equations apply. State-space models for dynamic systems are discussed so as to include time-varying parameters. This includes their linearization and the construction of the state transition matrix. Elements from the theory of random fun
External
Sustainable Mobility
Shams Tanvir · Mavs Open Press · 2024
This textbook and OER material cover tools and basic knowledge required to prepare transportation engineers and planners to contribute towards a carbon-neutral mobility future. In addition, we will explore the potential for vehicle electrification, automation, connectivity, and ridesharing to reduce the carbon impacts of auto mobility. The textbook modules are intended to inform and teach students how to design streets for modes that have almost no carbon emissions. The goal of the textbook is to train engineering students on existing tools and policy levers that can be used to incorporate emerging transportation technologies in a sustainable, equitable, and efficient manner. The course is designed for graduate transportation engineering, and city and regional planning students. The undergraduate seniors will be able to absorb the materials given they have already taken fundamental courses on transportation engineering and planning, including traffic engineering and highway design. This textbook is a product of the grant OERTransport: Enabling Transportation Planning Professional Advancement awarded to the University of Texas-Arlington (UTA) in consortium with California Polytechnic State University (Cal Poly) and the University of South Florida (USF). It was developed under an Open Textbooks Pilot grant from the Fund for the Improvement of Postsecondary Education (FIPSE), U.S. Department of Education. However, its contents do not necessarily represent the policy of the Department of Education, and no endorsement by the Federal Government should be assumed.
External
Fundamentals of Math, Physics, and Statistics for Future Transportation Professionals
Anurag Pande; Peyton Ratto; Ahmed Farid · Mavs Open Press · 2024
This textbook and OER material cover tools and basic knowledge required to master the prerequisite essentials of physics, mathematics, and statistics applied in transportation engineering. To our knowledge, no such textbook currently exists to build the KSTs (Knowledge, Skills, Tools) for college freshmen’ remedial courses required by most transportation engineering graduate programs that admit non-engineers (e.g., PHYS 141, MATH 142, STAT 321 at California Polytechnic State University, San Luis Obispo). The textbook modules are intended for students with undergraduate degrees in planning and other less technical fields who are interested in pursuing transportation careers where background engineering knowledge is required. This textbook is a product of the grant OERTransport: Enabling Transportation Planning Professional Advancement awarded to the University of Texas-Arlington (UTA) in consortium with California Polytechnic State University (Cal Poly) and the University of South Florida (USF). It was developed under an Open Textbooks Pilot grant from the Fund for the Improvement of Postsecondary Education (FIPSE), U.S. Department of Education. However, its contents do not necessarily represent the policy of the Department of Education, and no endorsement by the Federal Government should be assumed
External
Structural Dynamics
Hilmi Luş; Sinan Keten · Northwestern University Libraries · 2024
This textbook represents our effort to make freely available to students and practitioners the theory and common applications of structural dynamics. The presentation is hoped to inspire interest and active learning. The book's content is expected to evolve and expand in time so we truly welcome suggestions from readers and colleagues. To make available in a timely manner, the first upload/edition has been limited topics that could be covered in a senior level undergraduate or an introductory level graduate course in a single semester. Given the vastness of the theory and practical details, such a compromise was inevitable. On the other hand we hope that by continuing to expand the contents at certain intervals the material will eventually cover a very significant portion of the relevant literature and current practices. This living nature of the electronic medium was what motivated us to undertake this project to begin with. We thank Northwestern University Libraries for their interest in this textbook, and we express our gratitude to Xinyan Yang for her help in solving many problems we encountered along the way.
External
Adjustment theory: an introduction
Peter Teunissen · TU Delft Open · 2024
Adjustment theory can be regarded as the part of mathematical geodesy that deals with the optimal combination of redundant measurements together with the estimation of unknown parameters. It is essential for a geodesist, its meaning comparable to what mechanics means to a civil engineer or a mechanical engineer. Historically, the first methods of combining redundant measurements originate from the study of three problems in geodesy and astronomy, namely to determine the size and shape of the Earth, to explain the long-term inequality in the motions of Jupiter and Saturn, and to find a mathematical representation of the motions of the Moon. Nowadays, the methods of adjustment are used for a much greater variety of geodetic applications, ranging from, for instance, surveying and navigation to remote sensing and global positioning. The two main reasons for performing redundant measurements are the wish to increase the accuracy of the results computed and the requirement to be able to check for errors. Due to the intrinsic uncertainty in measurements, measurement redundancy generally leads to an inconsistent system of equations. Without additional criteria, such a system of equations is not uniquely solvable. In this introductory course on adjustment theory, methods are developed and presented for solving inconsistent systems of equations. The leading principle is that of least-squares adjustment together with its statistical properties. The inconsistent systems of equations can come in many different guises. They could be given in parametric form, in implicit form, or as a combination of these two forms. In each case the same principle of least-squares applies. The algorithmic realizations of the solution will differ however. Depending on the application at hand, one could also wish to choose between obtaining the solution in one single step or in a step-wise manner. This leads to the need of formulating the system of equations in partitioned form. Different partitions
External
Fracture Mechanics: An Engineering Primer
Michael Janssen; Jan Zuidema; Russell Wanhill · TU Delft Open · 2024
In this second edition, which is the result of numerous revisions, updates and additions, the authors cover the basic concepts of fracture mechanics for both the linear elastic and elastic-plastic regimes. The fracture mechanics parameters K, G, J and CTOD are treated in a basic manner along with the test methods to determine critical values. The development of failure assessment based on elastic-plastic fracture mechanics is reflected in a comprehensive treatment. Three chapters are devoted to the fracture mechanics characterisation of crack growth. Fatigue crack growth is extensively treated and attention is paid to the important topic of the initiation and growth of short fatigue cracks. Furthermore, sustained load fracture and dynamic crack growth are discussed, including various test techniques, e.g. the determination of the crack arrest toughness. Finally, there are two chapters dealing with mechanisms of fracture and the ways in which actual material behaviour influences the fracture mechanics characterisation of crack growth. This textbook is intended primarily for engineering students. It will be useful to practising engineers as well, since it provides the background to several test and design methods and to criteria for material selection.