Digital library
Textbooks, references and open learning resources.
External
Aerodynamics and Aircraft Performance
James Marchman III · Virginia Tech Libraries · 2004
Aerodynamics and Aircraft Performance, 3rd edition is a college undergraduate-level introduction to aircraft aerodynamics and performance. This text is designed for a course in Aircraft Performance that is taught before the students have had any course in fluid mechanics, fluid dynamics, or aerodynamics. The text is meant to provide the essential information from these types of courses that is needed for teaching basic subsonic aircraft performance, and it is assumed that the students will learn the full story of aerodynamics in other, later courses. The text assumes that the students will have had a university level Physics sequence in which they will have been introduced to the most fundamental concepts of statics, dynamics, fluid mechanics, and basic conservation laws that are needed to understand the coverage that follows. It is also assumed that students will have completed first year university level calculus sequence plus a course in multi-variable calculus. Separate courses in engineering statics and dynamics are helpful but not necessary. Any student who takes a course using this text after completing courses in aerodynamics or fluid dynamics should find the chapters of this book covering those subjects an interesting review of the material. The 236-page text was created specifically for use by undergraduate students in Aerospace Engineering and was based on Professor Marchman’s many years of experience teaching related subject matter as well as his numerous wind tunnel research projects related to aircraft aerodynamics and his personal experience as the owner and pilot of a general aviation airplane. It has been used at Virginia Tech and other universities. Instructors reviewing, adopting, or adapting parts or the whole of the text are requested to register their interest at: https://bit.ly/aerodynamics_interest.
External
Stability of Ships and Other Bodies
Genick Bar-Meir · Potto Project · 2021
This book, Stability of Ships and Other Bodies, describes the fundamentals when and why floating bodies are stable. In addition, it describes steps that transforms un–stable bodies to stable. This book is designed to replace all the other books and inseminate that recent developed technology and advances. The material in standard books is so entrenched, old, and outdated material that one can be only amazed. For example, concept like potential stability is not discussed or even mentioned in any of all the books that this author review. This book written from physical point of view rather then construction point of view like all the books review by this author on stability. It is hoped that the book could be used as a reference book for people who have at least some basics knowledge of science areas such as algebra, basic physics, etc. Even without deep understating the graphs in this book can be used to find necessarily quantities needed to understand if to fix your vessel.
External
Basic Blueprint Reading
Ric Costin · Open Oregon Educational Resources · 2019
This is an entry level blueprint reading book written for the first year welding student. The book will be used in the first term of a two year welding program to familiarize the student to sketching and reading blueprints.
External
Interpretation of Metal Fab Drawings
Cameren Moran · Open Oregon Educational Resources · 2021
Interpreting metal fab drawings is a course that introduces the principles of interpretation and application of industrial fabrication drawings. Basic principles and techniques of metal fabrication are introduced by planning and construction of fixtures used in fabrication from drawings. Basic tools and equipment for layout fitting of welded fabrications are utilized. Covers the use and application of the AWS welding symbols. This course will utilize blueprints and welding symbols and will apply them in classroom and in shop as practical assignments.
External
Traffic Flow Theory: An introduction with exercises
Victor Knoop · TU Delft Open · 2018
Traffic processes cause several problems in the world. Traffic delay, pollution are some of it. They can be solved with the right road design or traffic management (control) measure. Before implementing these designs of measures, though, their effect could be tested. To this end, knowledge of traffic flow theory is needed.
External
Introduction to Biosystems Engineering
Nicholas M. Holden; Mary Leigh Wolfe; Jactone A. Ogejo; Enda J. Cummins · American Society of Agricultural and Biological Engineers (ASABE), Virginia Tech Publishing · 2021
The discipline of Biosystems Engineering emerged in the 1990s from the traditional strongholds of agricultural engineering and food engineering. Biosystems engineering integrates engineering science and design with applied biological, environmental, and agricultural sciences. Introduction to Biosystems Engineering is targeted at 1st and 2nd year university-level students with an interest in biosystems engineering but who are not yet familiar with the breadth and depth of the subject. It is designed as a coherent educational resource, also available for download as individual digital chapters. The book can be used as a localized, customizable text for introductory courses in Biosystems Engineering globally. It is written as a series of stand-alone chapters organized under six major topics: Food and Bioprocessing; Environment; Buildings and Infrastructure; Information and Communications Technology and Data; Machinery Systems; and Energy. Each chapter is organized around stated learning outcomes and describes key concepts, applications of the concepts, and worked examples. Instructors adopting or reviewing this text are encouraged to register with the publisher using this form.
External
Bio-Inspired Sensory Systems
Geoffrey Brooks · Florida State University · 2021
Using natural sensory system concepts to develop and improve sensory systems will continue to thrive for many years to come. Technology advances rapidly (Moore’s Law) as does our understanding of biological principles and designs. These trends fuel the fertile grounds of bio-inspired sensory systems, a topic that is inherently multidisciplinary. This book will serve well as either an academic text on the subject or an introduction to the variety of proven bio-inspired designs. The focus is on sensory systems that interpret environmental stimuli. It introduces natural photo-, mechano-, and chemo-sensory systems across the animal kingdom and also summarizes various novel engineering ideas that glean ideas from these natural sensory systems.
External
Applied Fluid Mechanics Lab Manual
Habib Ahmari; Shah Md Imran Kabir; Ginny Bowers · Mavs Open Press · 2019
This lab manual provides students with the theory, practical applications, objectives, and laboratory procedure of ten experiments. The manual also includes educational videos showing how student should run each experiment and a workbook for organizing data collected in the lab and preparing result tables and charts.
External
Building Maintenance & Construction: Tools and Maintenance Tasks
Clifford Rutherford · University of Hawaii Manoa · 2018
Building Maintenance & Construction: Tools and Maintenance Tasks introduces and develops knowledge of basic building maintenance tools and materials, applied skills and techniques, industry health and safety standards, and preventive maintenance and troubleshooting practices required by employers for entry-level positions in the building trades and facilities maintenance fields.
External
Introduction to Industrial Engineering
Bonnie Boardman · Mavs Open Press · 2020
This book was created for an undergraduate Introduction to Industrial Engineering course at The University of Texas at Arlington (UTA). The chapters give an overview of the profession and an introduction to some of the tools used by industrial engineers in industry. There are interactive content exercises included at the end of most chapters. This interactive content aims to engage students in the content as they are reading. The book will continue to revised and updated with new information as it becomes necessary.
External
Electromagnetics
Steven Ellingson · Virginia Tech Publishing · 2020
Electromagnetics, volume 2 by Steven W. Ellingson is a 216-page peer-reviewed open textbook designed especially for electrical engineering students in the third year of a bachelor of science degree program. It is intended as the primary textbook for the second semester of a two-semester undergraduate engineering electromagnetics sequence. The book addresses magnetic force and the Biot-Savart law; general and lossy media; parallel plate and rectangular waveguides; parallel wire, microstrip, and coaxial transmission lines; AC current flow and skin depth; reflection and transmission at planar boundaries; fields in parallel plate, parallel wire, and microstrip transmission lines; optical fiber; and radiation and antennas. To express your interest in this book or series, please visit http://bit.ly/vtpublishing-updates Additional resources Problem sets and the corresponding solution manuals; Slides of figures used in and created for the book; LaTeX sourcefiles; Errata for Volume 2; Collaborator portal for the Electromagnetics series; Faculty listserv for the Electromagnetics series. An accessible version will be available in January 2020. The Open Electromagnetics Project Led by Steven W. Ellingson at Virginia Tech, the goal of the Open Electromagnetics Project is to create no-cost openly-licensed content for courses in engineering electromagnetics. The project is motivated by two things: lowering learning material costs for students and giving faculty the freedom to adopt, modify, and improve their educational resources. Books in this Series Electromagnetics, Volume 1 https://doi.org/10.21061/electromagnetics-vol-1 Electromagnetics, Volume 2 https://doi.org/10.21061/electromagnetics-vol-2
External
Microwave and RF Design: Amplifiers and Oscillators
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Amplifiers and Oscillators presents the design of amplifiers and oscillators in a way that enables state-of-the-art designs to be realized. Detailed strategies and case studies are presented. Design of competitive microwave amplifiers and oscillators is particularly challenging as many trade-offs are required in design, and the design decisions cannot be reduced to a formulaic flow. The emphasis is on developing design skills. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Modules
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Modules focuses on the design of systems based on microwave modules. The use of modules has become increasingly important in RF and microwave engineering for rapidly realizing high performance microwave systems. When integration is ultimately to be used, building a system up using modules provides a rapid means of prototyping and testing system concepts. A wide variety of RF modules including amplifiers, local oscillators, switches, circulators, isolators, phase detectors, frequency multipliers and dividers, phase-locked loops, and direct digital synthesizers are considered. Detailed design strategies for synthesizing filters based on parallel coupled lines are presented. The reader will gain an appreciation of design by synthesis. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Networks
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Networks presents the tools and techniques required to analyze and design microwave and RF circuits. Because of the finite speed of light, microwave circuits must be considered to be spatially distributed and so there is not a single ground. As such metrics that can be used to describe power flow are of most use. The topics covered include scattering parameters, signal flow graphs, and Smith charts. Acquiring expertise in these is the biggest barriers to a successful career in microwave and RF engineering. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Transmission Lines
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Transmission Lines builds on the concepts of forward- and backward-traveling waves. Many examples are included of advanced techniques for analyzing and designing transmission line networks with microstrip lines primarily used in design examples. Coupled-lines are an important functional element in microwave circuits, and circuit equivalents of coupled lines are introduced as fundamental building blocks in design. The text and examples introduce the often hidden design requirements of mitigating parasitic effects and eliminating unwanted modes of operation. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Microwave and RF Design: Radio Systems
Michael Steer · North Carolina State University Libraries · 2019
Microwave and RF Design: Radio Systems is a circuits- and systems-oriented approach to modern microwave and RF systems. Sufficient details at the circuits and sub-system levels are provided to understand how modern radios are implemented. Design is emphasized throughout. The evolution of radio from what is now known as 0G, for early radio, through to 6G, for sixth generation cellular radio, is used to present modern microwave and RF engineering concepts. Two key themes unify the text: 1) how system-level decisions affect component, circuit and subsystem design; and 2) how the capabilities of technologies, components, and subsystems impact system design. This book is suitable as both an undergraduate and graduate textbook, as well as a career-long reference book.
External
Fundamentals of Microwave and RF Design
Michael Steer · North Carolina State University Libraries · 2019
Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming.
External
Dredging Engineering: Special Topics
Sape Miedema · TU Delft Open · 2019
In dredging, production estimating is carried out mainly with analytical physical models of the different dredging processes.Slurry transport of settling slurries and cutting processes in sand, clay and rock are already covered in two other books by the author.Other processes like hopper sedimentation and erosion, water jet fluidization, cutter head spillage, pump/pipeline dynamics and clamshell dredging are covered in this Special Topics Edition.New topics may be added in the near future
External
Introduction to Aerospace Structures and Materials
René Alderliesten · TU Delft Open · 2018
This book provides an introduction to the discipline of aerospace structures and materials. It is the first book to date that includes all relevant aspects of this discipline within a single monologue. These aspects range from materials, manufacturing and processing techniques, to structures, design principles and structural performance, including aspects like durability and safety. With the purpose of introducing students into the basics of the entire discipline, the book presents the subjects broadly and loosely connected, adopting either a formal description or an informal walk around type of presentation. A key lessons conveyed within this book is the interplay between the exact science and engineering topics, like solid material physics and structural analysis, and the soft topics that are not easily captured by equations and formulas. Safety, manufacturability, availability and costing are some of these topics that are presented in this book to explain decisions and design solutions within this discipline.
External
Chemical Process Dynamics and Controls
Peter Woolf · openmichigan · 2009
Process controls is a mixture between the statistics and engineering discipline that deals with the mechanism, architectures, and algorithms for controlling a process. Some examples of controlled processes are: •Controlling the temperature of a water stream by controlling the amount of steam added to the shell of a heat exchanger. •Operating a jacketed reactor isothermally by controlling the mixture of cold water and steam that flows through the jacket of a jacketed reactor. •Maintaining a set ratio of reactants to be added to a reactor by controlling their flow rates. •Controlling the height of fluid in a tank to ensure that it does not overflow.