Nguồn ngoài
Operational Amplifiers & Linear Integrated Circuits
The goal of this text, as its name implies, is to allow the reader to become proficient in the analysis and design of circuits utilizing modern linear ICs. It progresses from the fundamental circuit building blocks through to analog/digital conversion systems. The text is intended for use in a second year Operational Amplifiers course at the Associate level, or for a junior level course at the Baccalaureate level.
- Tác giả
- James M. Fiore
- Nhà xuất bản
- Mohawk Valley Community College
- Nguồn
- LibreTexts
- Giấy phép
- CC BY-NC-SA
- Ngôn ngữ
- EN
Mục lục· 112 mục
- 01: Introductory Concepts and Fundamentals
- 1.01: Introduction
- 1.02: The Decibel
- 1.03: Bode Plots
- 1.04: Combining the Elements - Multi-Stage Effects
- 1.05: Circuit Simulations Using Computers
- 1.6: The Differential Amplifier
- 1.7: Summary
- 1.8: Problems
- 02: Operational Amplifier Internals
- 2.01: Introduction
- 2.02: What Is An Op Amp
- 2.03: Simple Op Amp Comparator
- 2.04: Op Amp Manufacture
- 2.5: Summary
- 2.6: Problems
- 03: Negative Feedback
- 3.01: Introduction
- 3.02: What Negative Feedback Is and Why We Use It
- 3.03: Basic Concepts
- 3.04: The Four Variants of Negative Feedback
- 3.05: Limitations On The Use of Negative Feedback
- 3.6: Summary
- 3.7: Problems
- 04: Basic Op Amp Circuits
- 4.01: Introduction
- 4.02: Inverting and Noninverting Amplifiers
- 4.03: Single Supply Biasing
- 4.04: Current Boosting
- 4.5: Summary
- 4.6: Problems
- 05: Practical Limitations of Op Amp Circuits
- 5.01: Introduction
- 5.02: Frequency Response
- 5.03: Gain-Bandwidth Product
- 5.04: Slew Rate and Power Bandwidth
- 5.05: Offsets
- 5.06: Drift
- 5.7: CMRR and PSRR
- 5.8: Noise
- 5.9: Summary
- 5.10: Problems
- 06: Specialized Op Amps
- 6.01: Introduction
- 6.02: Instrumentation Amplifiers
- 6.03: Programmable Op Amps
- 6.04: Op Amps for High Current Power and Voltage Applications
- 6.05: High Speed Amplifiers
- 6.06: Voltage Followers and Buffers
- 6.07: Operational Transconductance Amplifier
- 6.08: Norton Amplifier
- 6.09: Current Feedback Amplifiers
- 6.10: Other Specialized Devices
- 6.11: Summary
- 6.12: Problems
- 07: Nonlinear Circuits
- 7.01: Introduction
- 7.02: Precision Rectifiers
- 7.03: Wave Shaping
- 7.04: Function Generation
- 7.05: Comparators
- 7.06: Log and Anti-Log Amplifiers
- 7.07: Extended Topic
- 7.8: Summary
- 7.9: Problems
- 08: Voltage Regulation
- 8.01: Introduction
- 8.02: The Need for Regulation
- 8.03: Linear Regulators
- 8.04: Switching Regulators
- 8.05: Heat Sink Usage
- 8.06: Extended Topic- Primary Switcher
- 8.7: Summary
- 8.8: Problems
- 09: Oscillators and Frequency Generators
- 9.01: Introduction
- 9.02: Op Amp Oscillators
- 9.03: Single Chip Oscillators and Frequency Generators
- 9.4: Summary
- 9.5: Problems
- 10: Integrators and Differentiators
- 10.01: Introduction
- 10.02: Integrators
- 10.03: Section 3-
- 10.04: Section 4-
- 10.05: Section 5-
- 10.06: Section 6-
- 10.7: Summary
- 10.8: Problems
- 11: Active Filters
- 11.01: Section 1-
- 11.02: Section 2-
- 11.03: Section 3-
- 11.04: Section 4-
- 11.05: Section 5-
- 11.06: Section 6-
- 11.07: Band-Pass Filter Realizations
- 11.08: Notch Filter (Band-Reject) Realizations
- 11.09 Audio Equalizers
- 11.10: Switched-Capacitor Filters
- 11.11: Voltage-Controlled Filters (Extended Topic)
- 11.12: Summary
- 11.13: Problems
- 12: Analog-to-Digital-to-Analog Conversion
- 12.01: Section 1-
- 12.02: Section 2-
- 12.03: Section 3-
- 12.04: Section 4-
- 12.05: Section 5-
- 12.06: Section 6-
- 12.7: Summary
- 12.8: Problems