Nguồn ngoài

Fundamentals of Microwave and RF Design

Electrical Engineering Engineering

Tác giả: Michael Steer
Nhà xuất bản: North Carolina State University
Nguồn: LibreTexts
Giấy phép: CC BY-NC
Ngôn ngữ: EN

Đọc trực tuyến Tải PDF (nguồn mở)

Mục lục· 110 mục

01: Introduction to Microwave Engineering
1.01: RF and Microwave Engineering
1.02: Radio Architecture
1.03: RF Power Calculations
1.04: SI Units
1.05: Summary
1.06: References
1.07: Exercises
02: Antennas and the RF Link
2.01: Introduction
2.02: RF Antennas
2.03: Resonant Antennas
2.04: Traveling-Wave Antennas
2.05: Antenna Parameters
2.06: The RF Link
2.07: Exercises
2.08: Antenna Array
2.09: Summary
2.10: References
03: Transmission Lines
3.01: Introduction
3.02: Transmission Line Theory
3.03: The Lossless Terminated Line
3.04: Special Cases of Lossless Terminated Lines
3.05: Circuit Models of Transmission Lines
3.06: Summary
3.07: References
3.08: Exercises
04: Planar Transmission Lines
4.01: Introduction
4.02: Substrates
4.03: Planar Transmission Line Structures
4.04: Microstrip Transmission Lines
4.05: Microstrip Design Formulas
4.06: Summary
4.07: References
4.08: Exercises
05: Extraordinary Transmission Line Effects
5.01: Introduction
5.02: Frequency-Dependent Characteristics
5.03: Multimoding on Transmission Lines
5.04: Microstrip Operating Frequency Limitations
5.05: Summary
5.06: References
5.07: Exercises
06: Coupled Lines and Applications
6.01: Introduction
6.02: Physics of Coupling
6.03: Low Frequency Capacitance Model of Coupled Lines
6.04: Symmetric Coupled Transmission Lines
6.05: Directional Coupler
6.06: Summary
6.07: References
6.08: Exercises
07: Microwave Network Analysis
7.01: Introduction
7.02: Two-Port Networks
7.03: Scattering Parameters
7.04: Return Loss Substitution Loss and Insertion Loss
7.05: Scattering Parameters and Coupled Lines
7.06: Summary
7.07: References
7.08: Exercises
08: Graphical Network Analysis
8.01: Introduction
8.02: Polar Representations of Scattering Parameters
8.03: Smith Chart
8.04: Summary
8.05: References
8.06: Exercises
09: Passive Components
9.01: Introduction
9.02: Q Factor
9.03: Surface-Mount Components
9.04: Terminations and Attenuators
9.05: Transmission Line Stubs and Discontinuities
9.06: Magnetic Transformers
9.07: References
9.08: Exercises
9.09: Baluns
9.10: Wilkinson Combiner and Divider
9.11: Summary
10: Impedance Matching
10.01: Introduction
10.02: Matching Networks
10.03: Impedance Transforming Networks
10.04: The L Matching Network
10.05: Dealing with Complex Loads
10.06: Dealing with Complex Loads
10.07: Summary
10.08: References
10.09: Exercises
10.10: Impedance Matching Using Smith Charts
10.11: Distributed Matching
10.12: Matching Using the Smith Chart
11: RF and Microwave Modules
11.01: Introduction to Microwave Modules
11.02: RF System as a Cascade of Modules
11.03: Amplifiers
11.04: Filters
11.05: Noise
11.06: Diodes
11.07: Local Oscillator
11.08: Frequency Multiplier
11.09: Summary
11.10: References
11.11: Exercises
11.12: Switch
11.13: Ferrite Components- Circulators and Isolators
11.14: Mixer